Home / Tile Floors / ceramic tile company designs and makes floor tiles / Design Latest Tiles For Bedroom Floor Tilens Floors Best Trendy Bedrooms About Inspirations Impressive Ceramic Tile Company Designs And Makes Tilegns Tilesgn Indie
kkes Tile Floors September 14th, 2018 - 05:36:32
What floor covering was on the floor before? If it had ceramic tile or stone. and the floor received reasonable traffic for years with no cracking or broken grout. it`s a pretty good bet that the subfloor is up to the job. If it was vinyl. carpet or hardwood. we are still in the dark.
Can you cut into the layers on top to get a cross section of the existing floor? If there is a heating grate that you can remove. that may show the layers the floor is composed of. What will be reassuring to see is a thick layer. ideally over 1 ½ inches thick of plywood. Alternatively. with the property owner`s permission. we sometimes cut in to it to check what it`s composed of.
First. you have porcelain tiles. These tiles are made by firing at high temperatures. They are also very dense and moisture resistant. You can purchase porcelain in a variety of shades and colors. Porcelain tiles are the most expensive though but with them you have tile flooring ideas that can mimic stone and other materials.
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.