Home / Tile Floors / ceramic tile company designs and makes floor tiles / Ceramic Tile Company Designs And Makes Floor Tiles Nitco Wall Vitrified Www Nitcotiles In Bathroom Covering Porcelain Flooring Natural Stone Mosaic Discount Wood Design
kkes Tile Floors September 14th, 2018 - 05:36:10
Prepare the Sub-Floor for the Tiling Process. After you are ready with your tools and before you begin tile flooring installation. you must first prepare the sub-floor for the ceramic tile flooring installation. This involves cleaning the sub-floor thoroughly and checking it for cracks. If you do find cracks. you must repair them. If any crack is too large to repair. that section of the floor must be replaced completely. If your floors are wooden make sure that they are supported well and are at least two inches thick so that they are able to withstand the weight of the tiles you are about to install on them. Once you have checked for cracks and cleaned all the debris off the sub-floor you are ready to begin with your ceramic tile flooring installation.
Can you cut into the layers on top to get a cross section of the existing floor? If there is a heating grate that you can remove. that may show the layers the floor is composed of. What will be reassuring to see is a thick layer. ideally over 1 ½ inches thick of plywood. Alternatively. with the property owner`s permission. we sometimes cut in to it to check what it`s composed of.
It is remarkably durable. Have you ever considered that the Romans used tile that`s still around today? It holds up exceptionally well even in the highest-traffic areas. From porticos to palaces. the durability of tile has been tested and proven through centuries. So it is a long-lasting investment. A major home improvement website actually declares ceramic tile will last "a lifetime"; in other words. as long as the house is in use! Dime for dime. tile is clearly one of the most cost effective flooring surfaces you can choose.
How thick is the subfloor and what is it made of? In new construction. ¾ inch plywood or Oriented Strand Board is a standard subfloor over joists that are 16 inches on center apart. We find that is almost never enough to meet the deflection standards in most homes. Other times there is old plank flooring beneath a layer of plywood. This is a wild card. since the engineering tables usually don`t include the value for planks in their calculation. but common sense says it does add some stiffness.